measuring microscope
英 [ˈmeʒərɪŋ ˈmaɪkrəskəʊp]
美 [ˈmeʒərɪŋ ˈmaɪkrəskoʊp]
网络 测量显微镜; 工具显微镜; 测定显微镜
双语例句
- Evaluation of Uncertainty in Pitch Diameter Measurements of Thread Plug Gauge Using Tri-needle Method The Method for Measuring Diameter Size of Ring with Universal Measuring Microscope
三针法测量螺纹塞规中径的不确定度评定用万能工具显微镜测量环规内径尺寸的方法 - Flow microfluorometer analysis meters for measuring amplitude by a reading microscope
流动显微荧光测定分析读数显微镜测振幅法 - Compound optical measuring microscope
复合光学测量显微镜 - Study on Measuring Algorithms of Geometry in Microscope Inspection Method
显微视觉检测的几何量测量算法研究 - The Method for Measuring Diameter Size of Ring with Universal Measuring Microscope
用万能工具显微镜测量环规内径尺寸的方法 - Measuring numerical aperture of microscope by projection method
用投影法测量显微镜的数值孔径 - Therefore, the image processing method instead of conventional measuring microscope testing method may reduce the labor, enhance efficiency of testing and analyzing, and avoid influencing traffic.
因此，采用图像处理方法代替常规测微镜检测方法，可大幅度降低人员劳动强度，提高检测和分析效率，并避免影响交通。 - Through the analysis of the effect on the linearity of carriage moving of the universal measuring toolmaker microscope, the repair method has been proposed. And the main reasons effecting linear deviation and angle deviations are expounded respectively.
通过对影响万能工具显微镜滑板移动直线度的分析，提出有针对性的修理方法，并分别论述了产生线值偏差和角度偏差的主要原因。 - Computer Application to Improve Universal Measuring Microscope ( UMM) System
微机用于万能工具显微镜测量系统的改造 - Several measuring techniques such as electron-beam measuring technology, photon-beam measuring technology, ultrafast scanning probe microscope and so on are described emphatically.
着重介绍了几种超快电信号测量技术，电子束检测技术、光子束检测技术、超快扫描探针显微镜技术等。 - The Software Design for The Grating Numerical Indication and Computer Measurement System of Universal Measuring Microscope
万工显光栅数显微机测量系统软件设计 - We analyze a self-developing computer-aided measuring and processing system of universal measuring microscope.
介绍了一种自行开发的万能工具显微镜计算机辅助测量与处理系统。 - Analysis and Experiment on Influence of the Illuminating System on Measuring Veiling Glare Character of Microscope Objectives
聚光系统对显微物镜杂光测量影响的分析与实验 - The projection method for measuring numerical aperture of microscope is introduced, and the measurement results are shown.
介绍了投影法测量显微镜数值孔径的实验原理，并给出了测量结果。 - Repair of Linearity of Universal Measuring Toolmaker Microscope Carriage Moving
万工显滑板移动直线度的检修 - Computer-Aided Measuring And Processing System Of Universal Measuring Microscope
万能工具显微镜计算机辅助测量与处理系统 - Regarded as the traditional 2-D coordinate measuring system, omnipotence tool microscope has the most extensive application in the geometry measurement.
万能工具显微镜作为传统的二维坐标测量系统，在几何测量中具有最为广泛的应用。 - When the measuring system of point scanning confocal microscope is designed, the parameter of object lens is important because the measuring precision of the system are determined by the numerical aperture of lens.
在设计点扫描激光共焦显微镜测量系统时，物镜参数的选择是至关重要的，因为它的数值孔径大小直接影响着系统的测量精度。 - According to the character of CRCP, the testing difficulty of crack width with conventional measuring microscope and the urgent demand of the crack testing, the paper puts forward the method of picking and analyzing the crack image with computer image processing technique.
本文针对CRCP的特点与常规测微镜检测裂缝宽度的困难及裂缝宽度检测的迫切需要，提出了利用计算机图像处理技术进行裂缝图像的采集和分析的方法。 - The process was monitored by contact angle measuring system, microscope system, circular dichroism spectra.
使用接触角测量系统、圆二色光谱仪、显微观测系统对组装图案化过程进行监测表征。采用该方法得到高对比度细胞微阵列。 - Measuring by topography instrument and microscope, the action result of surface roughness With different hardness was analysed.
通过形貌仪和显微镜的检测，分析了不同硬度条件下，表面粗糙度的作用效果。 - Measuring microscope for tool angles of wood working circular saw blade
圆锯片刀具角度测量显微镜 - The measured results show that the maximum measuring error by proposed method is 2 μ m, which accords with the results measured by a stylus profiler and a universal measuring microscope.
利用该系统测量的微通道几何尺寸（1-1000μm）与轮廓仪和万能工具显微镜的测量结果吻合很好，最大测量误差为2μm（半深宽度），分析了测量误差产生的原因。 - He characterists and available limits of three measuring methods, measuring microscope ( comparator), spectrometer ( goniometer) and Frauhofer diffraction, of holograph grating constant are discussed.
探讨全息照相光栅的光栅常数用测量显微镜、测角仪、夫琅和费衍射三种方法测量的特点与适用范围。 - Measuring results of two microscope objectives were also given.
并给出了对两个显微物镜测量的结果。 - Application of moving and measuring microscope in measuring young's modulus of elasticity on metal
移测显微镜在测量金属杨氏模量中的应用 - In the experiments, a transparent plexiglass bag device and a plat bag structure are adopted and the dust layer thickness is measured on-line with mobile measuring microscope from outside of dust layer.
采用透明的有机玻璃装置和扁平布袋结构，用移动式测量显微镜从粉尘层外侧面在线测量其厚度。 - Nitric acid method with wooden fiber, calibration segregation of measuring the microscope measuring wood fiber length, width, fiber lumen diameter of fiber, and the calculating cellwall-lumen.
用硝酸法离析木纤维，标定后的测量显微镜下观察测量木材纤维长度，纤维宽度，纤维腔径，并计算壁腔比。 - The performance of the nanocomposites was analyzed by the Barcol hardness meter, measuring microscope and infrared spectrometer, which laid the foundation for the application of the liquid shock wave.
利用巴柯尔硬度计、工具测量显微镜、红外光谱仪等手段对制备的复合材料性能进行了分析，这为液体压力激波技术在纳米颗粒分散中的初步应用奠定了基础。